Üyelik Hesabım - Sistemden Çıkış - Üyelik Yükseltme - Firma Güncelle - Yeni Firma Kayıt

Favorime Ekle | Anasayfam Yap

    Firma Adı Ürün - Hizmet

Hunan great steel pipe co.,ltd  

Hunan great steel pipe co.,ltd
Sektör : [ İnşaat Malzemeleri ]

Hunan Steel Industrial Zone,No.9 Xiangfu Road, Yuhua District, Changsha, Hunan, China
Changsha - - Çin

Moo Zhang   Steel
+8673188678502 E-Mail
+8673188678508 http://www.great-pipe.com/

  • İnşaat Malzemeleri
  • Üretici
  • N/A
  • N/A
  • N/A

  • Son Güncelleme: 10.05.2017
    Bu firmanın bilgilerini güncellemek ve değiştirmek istiyorsanız.Giriş


    Bu bilgiler firmalar tarafından verilen bilgiler olup TurkeyBusiness.Com bu bilgilerin doğruluğu garanti etmez.
    Ayrıca bu bilgilerden dolayı sorumlu tutulamaz.

    İnşaat Malzemeleri sektöründeki firmaları görmek için ..
    İnşaat Malzemeleri sektör ürünleri görmek için

    Firma Hakkında Ürünler Haber ve Duyurular Yorumlar Nerede
      API 5L Gr.B
    API 5L PSL2 Gr.B grade designations come from API Spec 5L Specification for Line Pipe. Stronger grades have the designation X followed by the specified minimum yield strength of the pipe steel, measured in kilopounds per square inch (abbreviated ksi). Standard Line Pipe has grade designation A and B.

    Chemical composition(%)
    Standard Grade
    API 5L Gr.b C
    Mn
    P
    S
    0.24 1.20 0.025 0.015

    Mechanical requiremnts
    Grade Yield Strength (Mpa)
    Tensile Strength (Mpa)
    API 5L GR.B 245-450
    415-760

    Note: Line pipe mechanical testing usually omits Reduction of Area (RA) measurement reporting, and Charpy V-Notch (CVN) testing. This prevents use of this pipe as body material above 36 ksi yield strength for API Spec 6A equipment without retesting for Reduction of Area, and in the case of low temperature service, Charpy V-Notch testing as well.


    0.50% maximum for copper, 0.50% maximum for nickel, 0.50% maximum for chromium, and 0.15% maximum for molybdenum.
    For each reduction of 0.01% below the specified maximum concetration for carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65%.
    Unless otherwise agreed, the sum of the niobium and vanadium contents shall be <=0.06%.
    The sum of the niobium ,vanadium and titanium concentratons shall be <=0.06%.

      API 5L Gr.B hakkında yapılan yorumlar

    Bu ürünle ilgili yorum yapılmamış


    API 5L Gr.B ile ilgili yorum yazınız

      Diğer E-katalog Ürünleri
  • API 5L Gr.B


  • Text Linkler